First, your battery went dead, and now your car stereo is dead, and it’s really shaping up to be just one of those days. So you drive the rest of the way to work in silence, and you hope that the next step isn’t going to be buying a brand new car stereo. And it probably isn’t. In most cases, fixing a car stereo that quit working after the battery died is a lot simpler than that. Of course, it can also be a lot more complicated.
Cracking the Code of the Dead Battery and Deader Car Radio
There are a few different reasons for a car radio to stop working after the battery has gone completely dead. The first, and by far most common, is that the radio has an anti-theft “feature” that kicks in whenever battery power is removed. When that happens, all you have to do is enter the right car radio code, and you’re back in business. In certain rarer cases, you may be dealing with a damaged radio or even damage to other electrical systems other than your radio. For instance, if your radio stopped working after a botched jump start, the radio—and other delicate electronics—could have been fried. If you’re lucky, it might just be a fuse, and if you’re not, then this will just have to serve as a lesson as to how important it is to hook up jumper cables and battery chargers correctly.
Some Common Causes of This Type of Problem
The Curious Case of the Car Radio Code
Car radio codes are meant to act as a sort of passive anti-theft feature. When power to the radio is cut, the feature kicks in, and when power is returned, the unit is basically bricked until you enter a specific code. The readout may display, ever-so-helpfully, the word “code,” or it may just remain blank, or it may display an even more obtuse message, depending on the manufacturer. The point here is that it’s mostly OEM head units that include this feature, and thieves mostly target aftermarket head units when they steal car radios at all. That means car radio codes almost overwhelmingly become headaches for the lawful owners of those car radios, instead of the thieves they are meant to inconvenience. The best way to deal with a car radio code is to not deal with it at all. If you have a radio with this feature, and your battery hasn’t already gone dead, then you’ll want to figure out the code and write it — and the reset procedure — ahead of time. The process for finding a car radio code differs from one make to the next, but you’ll generally want to start by looking in your owner’s manual. If you bought your car used, the previous owner may have written the number down in the manual, and some manuals actually have a place to do so. If it isn’t there, then you can check the OEM website or contact your local dealer, although you may end up having to pay a local shop or online service to look the code up.
The Dangers of Incorrectly Charging or Jump Starting a Car
If your car radio stopped working after a jump start, or after a battery charge, then the problem might still be related to a car radio code anti-theft feature. Before you do anything else, you’ll want to rule that out. Make sure that your radio doesn’t have that feature, and if it does, verify that entering the correct code doesn’t get the radio up and running again. If it doesn’t, you might be looking at a bigger problem. The issue is that while it’s perfectly safe to jump start or charge a car battery when the procedure is carried out correctly, it’s extremely unsafe when the procedure isn’t carried out correctly. The biggest danger in jump-starting or charging a battery is actually related to the explosive nature of the hydrogen gas that can leak from a lead-acid battery. This is why the final cable you hook up should always be a ground cable, and it should be hooked to the ground, rather than the battery. If you hook directly to a battery, and any hydrogen gas has leaked from the battery, the resulting spark could ignite the gas and cause an explosion. Beyond the dangers of an exploding car battery, which I’ll assume didn’t happen, since a dead radio would be the least of your concerns at that point, hooking up jumper cables or a charger wrong can also cause electrical system damage. If the cables were hooked up backward at any point, and your radio stopped working as a result, then the radio may well be fried. And quite aside from your radio, any number of other components could also be fried.
When Fuses and Fusible Links Save the Day
Unlike people, who may spend their entire lives in search of a purpose, fuses are born into this world with the sure and certain knowledge that they will one day die to save another. In the case of your car radio fuse, it is designed to sacrifice itself to prevent a dangerous amount of current from flowing through your car radio and the associated circuit. If your radio is dead due to a botched jump start or charge, and you’re lucky, then you may find that your car radio fuse is blown. In some cases, it may be the fuse located inside the radio, while in others it may be the fuse in the car’s fuse box. In other cases, you may find that a fusible link has blown, or that a wire somewhere has melted. In other far more serious scenarios, you may find that other electronic components, right up to and including your extremely expensive electronic control unit, may have also been damaged. This is why it’s so important to know how to use a jump box to jump-start a car, and never, ever let anyone, no matter how well-meaning, hook them up wrong. After all, simply being a good Samaritan doesn’t mean they actually know anything about cars.
Sometimes Coincidences Actually Happen
When two things happen at exactly the same time, it’s easy to just assume that they are related. And in the case of dead batteries and dead car radios, there’s a definite chance that the problems are related. However, you may find that your car radio suddenly quit working for a totally unrelated reason. For instance, if your radio turns on and displays a station, but no sound comes out of the speakers, then it’s probably an issue with the speakers or the wiring, or even the antenna. In that same vein, a car stereo with a non-functioning radio may be tracked down to bad radio reception due to issues like an antenna problem if other audio sources, like the CD player, work just fine.
